An exterior spiral stair made completely of Mahogany will hold up to the elements through the end of time. A low maintenance recommeded finish is to seal with an oil finish, then apply another coat as needed, to maintain its’ original beauty. This style is a Curvoflite standard, with a rectangular handrail and square balusters.

Two contemporary, helical staircases were designed for this private residence using round, red oak handrails, set above the oak buttress caps. Upeasements provided for a smooth continuous flow of the rails between floor levels. The buttress was covered with fabric, and lights were installed under each tread, further highlighting the design of the stairs. The 1’-10” inside radius allowed for

The champagne metallic finish applied to the metal balusters created a sleek wood and metal combination, which harmonizes with the beauty of clear maple. An alternating pattern of scroll and wavy balusters was selected by the homeowner to create drama and appeal.

This installation shows a Curvoflite 8’-6” diameter buttress style spiral over a 7’-6” diameter, spanning three floor levels. Our 2” x 6” handrail #R600, and square balusters #B101, were applied to the face of the skirt board, with straight riser brackets adding to the contemporary design. Gallery style #2 with an Oak fascia board was installed at the loft above for continuity in this elegant application.

Features a 5’-0” diameter with components of the chamfered handrail #R200, one center baluster per tread, and all balusters were chamfered #B202. Gallery application Style #2 was chosen for this left hand turn spiral.

Curvoflite’s standard style spiral, composed of the rectangular handrail #R100, and square balusters #B101(with no center baluster per tread), in its’ simplicity is perfectly elegant. (3’-6” diameter)