Curvoflite: Your one souce supplier of spiral and circular stairs

This installation features a colonial style 3'-6" diameter spiral, achieved through a combination of the moulded handrail #R300, turned balusters #B303, with one additional turned baluster on the center of each tread. This design was continued at the sitting area loft above, with matching gallery style #3, to which the homeowner also applied an oak fascia board.

Please provide the information listed in Request for Quote (diameter; height; wood species, and design options), in addition to sketches or architectural prints, if available, showing first and second floor levels.

Upon receipt of this information, accompanied by a deposit, we will submit architectural drawings, along with any recommendations, for approval prior to fabrication.

Note: Finished well opening dimensions must be a minimum of 4” larger than the diameter.

Code Compliance

Curvoflite’s spiral and circular staircases generally comply with the National BOCA building codes, however, due to the strictly custom design of each stair and end use or application, as well as rapidly changing Code requirements, it is the full responsibility of the person ordering the stair to ensure it meets with their local and/or state building codes appropriate for their use. We will be happy to discuss code issues with your local Inspector on your behalf.

Design Service

Curvoflite Stairs And Millwork, Inc., maintains a toll free number (877) 782-4771 should you require more information than is provided in this catalogue. Our staff can generally solve layout and design problems over the telephone if a copy of your floor plan has been sent to us in advance of your call.

Installation

As each stair is handcrafted and built in our shop prior to shipping, re-assembly of the stair requires a minimum of work. The tread is one piece with the riser and end bracket assembled, numbered on the inside to match a number on the center pole. Each baluster is also numbered, to a corresponding number on top of the end bracket. The platform, unless otherwise designed, should be flush with your finished floor level, supported by a small bracket underneath which is bolted to the floor joist. The center pole has a base plate collar that is screwed to the floor. Gallery (balcony) railing is sent loose, to be cut and fit on site, after the platform is attached.

Shipping

Each spiral stair is fully shop assembled, then partially disassembled to facilitate handling and reduce shipping charges. The stairs are packed and crated in three custom triwall corrugated boxes: the center pole is one separate box, the handrail is bubble wrapped, and all other parts (platform, assembled tread and riser unit, balusters, hardware, plugs and buttons) are sent in one box 24” high x 36” wide x 72” long.



Home About Us Spiral Staircases Circular Staircases How to Order Request a Quote for Spiral Staircases Request a Quote for Circular Staircases Contact Us 617.889.0007		How to Order This installation features a colonial style 3'-6" diameter spiral, achieved through a combination of the moulded handrail #R300, turned balusters #B303, with one additional turned baluster on the center of each tread. This design was continued at the sitting area loft above, with matching gallery style #3, to which the homeowner also applied an oak fascia board. Please provide the information listed in Request for Quote (diameter; height; wood species, and design options), in addition to sketches or architectural prints, if available, showing first and second floor levels. Upon receipt of this information, accompanied by a deposit, we will submit architectural drawings, along with any recommendations, for approval prior to fabrication. Note: Finished well opening dimensions must be a minimum of 4” larger than the diameter. Code Compliance Curvoflite’s spiral and circular staircases generally comply with the National BOCA building codes, however, due to the strictly custom design of each stair and end use or application, as well as rapidly changing Code requirements, it is the full responsibility of the person ordering the stair to ensure it meets with their local and/or state building codes appropriate for their use. We will be happy to discuss code issues with your local Inspector on your behalf. Design Service Curvoflite Stairs And Millwork, Inc., maintains a toll free number (877) 782-4771 should you require more information than is provided in this catalogue. Our staff can generally solve layout and design problems over the telephone if a copy of your floor plan has been sent to us in advance of your call. Installation As each stair is handcrafted and built in our shop prior to shipping, re-assembly of the stair requires a minimum of work. The tread is one piece with the riser and end bracket assembled, numbered on the inside to match a number on the center pole. Each baluster is also numbered, to a corresponding number on top of the end bracket. The platform, unless otherwise designed, should be flush with your finished floor level, supported by a small bracket underneath which is bolted to the floor joist. The center pole has a base plate collar that is screwed to the floor. Gallery (balcony) railing is sent loose, to be cut and fit on site, after the platform is attached. Shipping Each spiral stair is fully shop assembled, then partially disassembled to facilitate handling and reduce shipping charges. The stairs are packed and crated in three custom triwall corrugated boxes: the center pole is one separate box, the handrail is bubble wrapped, and all other parts (platform, assembled tread and riser unit, balusters, hardware, plugs and buttons) are sent in one box 24” high x 36” wide x 72” long.
		Home \| About Us \| Circular Stairs \| Spiral Stairs \| How to Order Request a Quote for Spiral Staircases \| Request a Quote for Circular Staircases \| Contact Us

How to Order

Code Compliance

Design Service

Installation

Shipping